Category: Default Logins

Xfinity Login Setup

Xfinity was introduced in 2010, from its parent company named Comcast. This company offers both cables and fiber plans. In addition, to being an Internet Service Provider (ISP), it offers Xfinity tv, Xfinity voice phone service, Xfinity mobile wireless service, and Xfinity home security services, etc. Equipment-wise, you will need an Xfinity gateway or third-party modem/router that is approved for the Xfinity service. This device transmits a wireless signal and connects devices to each other, and the internet through the modem.

The area in which a wireless-capable device can pick-up the wireless signal and connect to the wireless networks. The online site used to view and change the settings of a router and wireless network is called the admin tool for the Wireless Gateway1 and Wireless Gateway2. The login information is used to access the administration site.

Connect Xfinity Router To PC

Step 1: Firstly, you need to power on the Modem and Connect your ethernet cable, one end to the back of the Xfinity modem.

[Note: Make sure that four lights are ON on the modem, which includes (Power, US/DS, Online, Wi-fi) all four has to be steady.]

[Note: As the device functions as both, the modem and a router. So, you need only one device to set up your wireless home network.]

Step 2: Open your browser, enter the default IP address (http://10.0.0.1/ – Learn More About 10.0.0.0.1 ), which redirects to the login page. Enter your default Username: admin Password: password then you need to log in.

Step 3: After logging into the site, it opens start page for the gateway.

Step 4: Click on connections at the left side of your page, and then you get a few options to select. Click on wi-fi. Edit your wi-fi settings by clicking on edit.

Gateway -> Connections -> Wi-Fi -> Edit.

Step 5: You need to change your network name to whatever you like. You can also change the network password.

Step 6: Once you complete your editing, click on save settings.

Xfinity Router Login and Setup

Step 1: (10.0.0.1) is a class, an address with default subnet mask (255.0.0.0) used for setting up private networks.

Step 2: (10.0.0.1) is often called Default Gateway Address, as it is used to login to Xfinity router admin settings.

Step 3: Open any web browser and visit https://10.0.0.1/. Press enter and you will see the admin login page.

Step 4: Enter the default username and password given on your router.

Router login: http://10.0.0.1/
Login Name (case sensitive): admin
Login Password (case sensitive): password
SSID (Network Name): Printed on bottom of device label.
Network Key: Printed on bottom of device label.

[Note: Customers can use the secure default SSID and Network key without having to access the user interface.]

Step 5: Go to the router settings and functions that give you access to control and make changes.

Step 6: Head to the Network tab and you can set up the network with many different methods, such as Dial-up connections (or) DSL method.

Step 7: Enter the default username and password to change and set up the DNS.

Step 8: If your router has the feature to select the type of wireless function, then select WPA (or) WPEAS. It ensures your router is safe.

FAQS and Common Issues:

10.0.0.1 refused to connect:

If you are not able to connect to the 10.0.0.1, then it could be because there exists no device, which uses 10.0.0.1 as it is default gateway.

10.0.0.1 took too long to respond:

There are often problems with the router itself, due to prolonged usage and frequent power failures.

Cisco Default Router Login Setup Guide – August 2020 Updated

Cisco is a company that builds these networking devices and one of them is routers. Cisco IOS is a proprietary operating system that Cisco routers and switches run on. Cisco’s ISR series routers are the example of routers that provide various services. ISR 1800 and 2800/2900 series routers. Every command and concept discussed holds true for all of these routers. The only difference that you need to be aware of is the output difference in memory, interface type (Ethernet or Fast Ethernet), and a number of interfaces. These interfaces available on switches vary from one series to another series. Cisco also provides a wide range of switches under its Catalyst brand. These are Fast Ethernet interfaces used to connect the hosts to the network.

Different models have different interfaces. The console port is a port used to connect to the switch to configure, monitor, and troubleshoot.

Cisco Router Login Default Router Admin and Password Setup

Step1: Turn on your PC. Connect your PC to the Cisco router. Power on the Cisco router.
[Note: Make sure that your wi-fi network is connected to PC]

cisco router connected to PC — Cisco Router Connected To PC

Step2: Open the run dialogue box by pressing Window + R (Keys), type cmd, and press ok, to open the command prompt.

windows key + r cmd — Windows key + R CMD

Step3: Now type the following command i.e., (IP Config). Check for the default gateway which displays your default IP Address.

Step4: After finding the login IP Address of the Cisco router, open google browser and then enter the default IP Address.
IP Address: (192.168.1.1) or (192.168.1.124).

Step5: Hit enter key to input the default login credentials.

Step6: The user name is admin and the password is admin.
Username: Admin
Password: Admin

Step7: After logging into the routers setup page, you can change the routers security settings or change your login details such as username (or) password…

Connect Your PC To The Cisco Router

Step 1: Firstly, you need to take a rollover cable and connect it in a flip pattern. Basically, there are two types of rollover cables.

The first type of cable includes a DB-9 connector attached to the cable. One end of the cable is connected to the PC, and the other end of the cable is connected to the router.

The second type of cable includes the RJ-45 connector and the ends of the cable are connected in the flip pattern.

[Note: Do not use both the rollover cables. Anyone type of rollover cable must be used.]

Step 2: Connect one end of rollover cable to the serial port of PC using DB-9 connector, and then connect the console cable to it.

Step 3: Connect another end of rollover cable to the console port of a router.

Step 4: The router is connected to PC which consists of RJ-45 to DB9 (or) RJ-45 to DB-25 adapter and console port (RJ-45).

Step 5: Communication software can be used i.e., (Hyper term, Tera term, etc) software to log in to the router.

Our Latest Updates

In Order To Communicate With The Cisco Router There Are Few Steps To Follow:

Step 1: Click on Start Programs Accessories Communication Hyper Terminal.
Step 2: After clicking on Hyper Terminal, enter any name in the box provided in the connection description box. Click ok.
Step 3: Select COM port, and click on OK.Step4: Change the port settings near Bit Per Second as 9600, then click on apply.
Step 5: Information is retrieved from the router to the terminal. Information includes Processor board ID, Version, IP Address, RAM, ROM, etc.
Step 6: After the process is completed you need to log in.

cisco router Cisco Router Default Password Cisco Router Login

Netgear Router Login Setup

Netgear routers allow multiple computers to share a common internet connection from your internet service provider such as cable, DSL input, etc. On the other hand, there are different types of Netgear routers which consist of Wi-Fi bands around the bandwidth of 2.4GHz Wi-Fi band and 5.0GHz Wi-Fi band. Some routers provide firewalls, considering protection against hacking into your network. It consists of active built-in antennas because they have amplifiers right inside the antenna itself, instead of the router. This has a couple of advantages such as, it can reduce interference, it can extend the range of the wi-fi, it can increase the speed and allow to connect you to more devices on your home network. Netgear setup wizard guides the user through the installation process.

To Install Your NETGEAR Route Follow Our Steps Below

Step 1: Connect the Router to PC ( Ethernet Cable).

[ Note: When you’re trying to configure the Netgear router directly connect the PC to the router without the modem.]

Step 2: After configuring the mandatory settings, you can connect the modem between your ISP (Internet Service provider) and the router.

Step 3: The communication should be between your PC and the router.

Step 4: After you turn on the Netgear router you need to check for the login IP address.

Step 5: For most of the Netgear routers the default IP address will be as follows:

IP address – 192.168.1.1 (or) 192.168.0.1

Step 6: To check the default login IP address, check the instruction booklet (or) follow the steps given below:

Where the IP address is not always 192.168.l.254, you just have to do this to find the correct address by following our guide.
For Windows
Press Windows + R then type the name of cmd -> Window version will open…
Then IP Config / all
Retrieve the address named gateway or server.
On macOS
Click on Apple Menu – System preferences – Network and choose your network Connection
Next select either wifi or Ethernet on the left corner side
Now, IP will visible in the middle on the display

Check for the default gateway which displays your default IP address.

Step 7: After finding the login IP address of the Netgear router, open any web browser and then enter the IP address.

Step 8: Hit enter key to input the default login credentials by referring to the instruction booklet. You can even find the credentials on the wireless router itself.

Step 9: The username is admin and the default password is password.

Connection of Netgear router to PC using LAN cable:

STEP1:

Connect your ISP (Internet Service Provider) network cable to the modem. This could be a DSL (or) a LAN input.

STEP2:

Connect the LAN cable to one of the output ports of the modem and input the same cable to the Netgear router internet port.

STEP3:

Connect another LAN cable which should be inserted separately to the output LAN port of a Netgear router, and input the same network cable to the computer.

STEP4:

Connect the power adapter to the modem and Netgear router to browse the internet.

[NOTE]

If you do not have a modem between the ISP and the Netgear router then follow these steps:

Connect your ISP LAN cable to the input internet port of the Netgear router.
Take the network cable and connect it to one of the output ports of the router and the other end should go to the computer LAN input.
Finally, power on the wireless Netgear router to browse the internet.

Connection of Netgear router to PC using WI-FI:

STEP1:

Connect your ISP (Internet Service provider) network cable to the modem. This could be, a DSL (or) a LAN input.

STEP2:

Connect the LAN cable to one of the output ports of the modem and input the same LAN cable to the Netgear router internet port.

STEP3:

Power on the wireless Netgear router.

STEP4:

Check for the instruction booklet of the Netgear router that consists of the SSID name and the default wi-fi password.

STEP5:

Turn on your PC check for the Broadcasted SSID name of the Netgear router.

STEP6:

Connect it by using the default wi-fi password by referring to the instruction booklet. You can use and find the same credentials on the wireless router itself.

[NOTE]:

If you do not have a modem between the ISP and the netgear router then follow these steps:

Connect your ISP LAN cable to the input internet port of the Netgear router.
Power on the Netgear wireless router.
Check for the instruction booklet of the Netgear router that consists of the SSID name and default wi-fi password.
Turn on the PC and check for the broadcasted SSID name of the Netgear router.
Connect it by using the default wi-fi password by referring to the instruction booklet. You can use and find the same credentials on the wireless router itself.

Connect Netgear router to browse internet securely:

STEP1:

Connect router to the PC.

[ Note: If you fail to get the login page of the router, do try accessing the login IP address on your smart phone or any device that uses no anti-virus software.]

STEP2:

After getting the router login dashboard, first, you need to enable the wireless security. To do this, move to the wireless setting tab and name your network. You will find this name when you try to connect to the network broadcast. This network is called as SSID.

STEP3:

After naming the network you must enable security. From the list choose WPA2-PSK[AES] and enter the passphrase provided below. In case, if you have forgotten the passphrase, you need to reset the whole router to factory default settings to reconfigure the wireless Netgear router. Click on a card beside antenna to know how to reset the Netgear router.

STEP4:

The next core setting is to change the device password. In order to change the Netgear router login password, we need to find a set password under maintenance. Enter the old and new desired password.

[Note: We recommend you note down the password, otherwise you will end up resetting the router which takes time to set up again. Please do not share your password with anyone.]

STEP5:

Once everything is done, you must reboot Netgear for the changes to take effect.

STEP6:

Now reconnect to the wireless network with a new Wi-fFi password.

Default Logins netgear netgear router netgear router login

Tenda Router Login Setup – Tenda Default Usernames & Passwords

It is very important to know all the information about the configuration of your Tenda router. So today in this blog, we will tell you how to login to the Tenda router.

As we know, we got the manual of Tenda router at the time of purchase in which you will get all the information for setup. But we don’t want to read the whole instructions, that’s why we are providing you the step by step guide for configuration of Tenda router.

What is a Tenda router?

Tenda router is a wireless device that helps to connect the internet on smartphones, PCs, and Laptops. Today everyone is going for Wi-Fi for a better connection. If you also want to use Wi-Fi services then you can also go with Tenda Wi-Fi. Only the thing is that you have to learn something for configuration, password change, and settings of the router.

A Tenda router will provide you high-speed internet without any network issues. You can use it at your home at any corner of the house.

How To Configure The Tenda Router?

You have to follow these steps to login to your Tenda router.

# Connect the Router

If you are connected with the router then it is ok, otherwise you have to connect the router with the Ethernet cable to its network. Only after performing this action, you can proceed for further steps.

# Add the IP address

192.168.0.1 Admin

After connecting the router, now you have to open the Internet Browser and type the default IP address 192.168.0.1. at the address bar. But if you are unknown about the IP address then you can see the IP address at the bottom of your Tenda router or you can also search on google for different Tenda IP addresses list. You will get that information.

# Enter username and passwords

After entering the IP address, now you will be redirected to the login page. Enter your username and password to proceed and then tap on login ( Use the word “Admin” in the user and password fields ).

So this is the process to configure your Tenda router. If you are facing any issues, then you can call the customer care number for queries.

How To Reset Tenda Router Settings?

This is a very common question asked by users on Google. If we are facing any troubleshoot then we have to reset the settings to enjoy unbreakable service. So here are some steps which you have to follow to reset Tenda router settings.

Step 1: First of all, you have to check whether your router is connected or not.

Step 2: Now login to your router by filling the IP address.( 192.168.0.1 )

Step 3: After login, now you have to click on Administration and then tap on Device management.

Step 4: Now click on Factory default and then tap on reset.

Step 5: It will ask for a final confirmation, you have to click on Ok.

Step 6: The router will take some time to erase all the settings and then it will come back to default settings.

Step 7: Now restart the router after erasing all the previous settings. The router is now ready to configure again with your details.

So these are the steps to reset the settings of your Tenda router. First, try not to face this kind of issue, but if it arises then you have to follow these steps.

How To Change The Tenda Wi-Fi Password?

You have to add a secured password so that no one can access your Wi-Fi but still, if you want to change the password, then you have to follow some basic steps.

Step 1: First of all, enter the IP address on the address bar.

Step 2: Then add the username and password for login.

Step 3: Now you have to click on the advanced option to change the settings.

Step 4: And now click on the System tools, then click on the password Settings.

Step 5: Now first, you have to add the current password, then add the new password, and confirm it.

Step 6: Now tap on ok, it will ask for confirmation, then tap Ok again. Your router password is changed successfully.

So this is the way to change your router password.

How To Lock The Dashboard From Unknown Users?

It is very necessary to lock your dashboard from unknown users otherwise, you have to bear low-speed internet. You have to follow these steps to lock your router dashboard.

First, log in to the dashboard and then click on the menu bar and click on the Wireless option.
Now you have to tap on the System tools to change your password.
Now you are at the page where your default username and password are mentioned.
Now you have to click on change and now change the default username.
After adding a new username, now click on the change password.
Now you have to fill your old password and new password and then click on confirm to change the password.
Now your password is changed successfully and your dashboard is fully secured.

So these are the steps you should follow to lock your Tenda dashboard from unknown users. We will strictly recommend you to change your default username and password for more privacy.

If you forget the login details at any time, then you have to factory reset your router and have to configure it again to enjoy the service. So we will recommend you to save your username and password in your phone so that you can get unstoppable service.

Final Conclusion

So we have provided all the necessary and relevant information about how to login to the Tenda router and all the security measures you should take to prevent irrelevant issues.

It is not a tough task to configure Tenda router, but still, if you have any issues related to Tenda router, then please comment below and we will be with you in some time and solve your issues.

Default Logins tenda login tenda router login tenda router setup